Weave Locking Privacy Cremone

Von Morris Weave Cremone Bolts feature a solid brass case CNC milled from brass billet and guides with an internal mechanism of brass and stainless steel. The Locking Cremone case is very narrow, less than 1.5" for use on narrow stiles of French Doors and Windows. Cremone Bolt locks from the exterior with a rim cylinder and inside with a turn piece. The Cremone case contains a cassette mechanism that can be handed simply by reversing the cassette. The Cremone can also be easily changed from lever operation (90 degree rotation) to knob operation (180 degree) simply by relocating the spindle. Shoot Bolts are attached to the Cremone mechanism with machine screws. Price includes Weave Turnpiece and CYlinder Collar along with either a pair of Weave Levers or Knobs, and a small Weave Rose for the exterior.

End Guides have a flat spring operating on the front of the bolt to prevent rattling. The length of the Guide and placement of the spring conceals any scratches on the bolt caused by the spring. This End Guide design allows the bolts to be installed on the door and then cut to length on the job site.

Length of case: 10.50"

Width of case: 1.463"

Height to edge of case: 0.787"

Height to face of knob/lever boss: 1.024"

Spindle hub to turnpiece spacing: 2.250"

Spindle hub to cylinder spacing: 2.467"

Knob- 180 degree rotation

Lever- 90 degree rotation

Knob Operation: 1.00"

Lever Operation: 0.75'